{"id":53609,"date":"2026-05-20T05:04:32","date_gmt":"2026-05-20T05:04:32","guid":{"rendered":"https:\/\/zobai.com\/?p=53609"},"modified":"2026-05-20T05:04:58","modified_gmt":"2026-05-20T05:04:58","slug":"valvula-de-alivio-de-presion-vs-valvula-de-seguridad-vs-valvula-de-seguridad-vs-valvula-de-alivio","status":"publish","type":"post","link":"https:\/\/zobai.com\/es\/blog\/prv-vs-psv-vs-safety-valve-vs-relief-valve\/","title":{"rendered":"Gu\u00eda de ingenier\u00eda: Comparaci\u00f3n entre V\u00e1lvula de Alivio de Presi\u00f3n (PRV), V\u00e1lvula de Seguridad de Presi\u00f3n (PSV), V\u00e1lvula de Seguridad y V\u00e1lvula de Alivio"},"content":{"rendered":"\n

PRV, PSV, safety valve and relief valve are all used in pressure protection discussions, but they should not be treated as interchangeable purchasing terms.<\/strong> In many projects, PRV means pressure relief valve, PSV means pressure safety valve, safety valve often refers to rapid-opening protection for steam or gas service, and relief valve is often associated with liquid or thermal expansion service. In practice, these words are used differently by region, industry and company standards. The safest way to compare them is not by abbreviation alone, but by confirming protected equipment, service fluid, set pressure, required relieving capacity, certified capacity, valve type, back pressure, seat tightness, material, applicable standard and required documentation. A valve may fit the pipe and carry a familiar abbreviation, yet still be wrong for the actual relieving scenario.<\/p>\n\n\n\n

Quick Answer \/ Engineering Summary:<\/strong> PRV usually means pressure relief valve, but it can also mean pressure reducing valve in some contexts. PSV usually means pressure safety valve and is common in oil, gas, refinery, petrochemical and process industries. A safety valve is typically associated with rapid opening for steam, gas or other compressible fluids. A relief valve is often associated with liquid service or gradual \/ modulating opening. A safety relief valve is a broader term used for valves that may handle gas, liquid or mixed service depending on design. Final selection must be based on engineering data, not the abbreviation.<\/p>\n\n\n\n

\"PRV
The abbreviation alone is not enough for correct valve selection.<\/figcaption><\/figure>\n\n\n\n

Safety warning:<\/strong> Do not buy, replace or approve a pressure protection valve only by the words PRV, PSV, safety valve or relief valve. Always verify service fluid, set pressure, required relieving capacity, certified capacity, back pressure, material, test report and applicable code before approval.<\/p>\n\n\n\n

Not sure whether your project needs a PRV, PSV, safety valve or relief valve?<\/strong><\/p>\n\n\n\n

Send us your protected equipment, MAWP, medium, fluid state, operating pressure, set pressure, required relieving capacity, relieving temperature, back pressure, connection size, material requirement and certificate requirement for engineering review.<\/p>\n\n\n\n

\n\n\n\n

Why These Terms Are Often Confused<\/h2>\n\n\n\n

The confusion comes from three sources. First, different industries use different terminology. Oil and gas documents may use PSV, while general mechanical, utility or equipment documents may use PRV. Second, regional language varies. Some buyers use PRV for almost any pressure relief device. Third, the same abbreviation can mean different devices in different contexts.<\/p>\n\n\n\n

This matters because pressure protection is not selected by name alone. A valve installed on a steam boiler, a compressed air receiver, a chemical vessel, a liquid thermal expansion line and a flare-connected process system may all be called a \u201cPRV\u201d by someone, but the engineering requirements are not the same.<\/p>\n\n\n\n

PRV and PSV Are Often Used Differently by Region and Industry<\/h3>\n\n\n\n

In many industrial documents, PRV means pressure relief valve<\/strong>, while PSV means pressure safety valve<\/strong>. In refinery, petrochemical, oil and gas projects, PSV is often used as a familiar term for pressure safety devices protecting pressure equipment from overpressure. In other industries, PRV may be used more broadly.<\/p>\n\n\n\n

Neither abbreviation proves the valve design, certified capacity or applicable code. A purchasing description that only says \u201c1 inch PRV, set 10 bar\u201d is not enough for engineering approval. It does not tell the supplier whether the valve protects gas, steam, liquid, two-phase flow, thermal expansion, a pressure vessel, a boiler, a pump discharge line or a process skid.<\/p>\n\n\n\n

Abbreviation Alone Does Not Define the Correct Valve<\/h3>\n\n\n\n

A correct pressure relief device selection must answer engineering questions: What equipment is protected? What is the maximum allowable working pressure? What is the governing relief scenario? Is the medium gas, steam, liquid or two-phase? What is the required relieving capacity? What back pressure exists at the outlet? What standard and certificate are required?<\/p>\n\n\n\n

The abbreviation is only a label. It is not a datasheet, a capacity certificate, a material specification or an installation review.<\/p>\n\n\n\n

Why Wrong Terminology Can Lead to Wrong Procurement<\/h3>\n\n\n\n

Wrong terminology can cause the wrong valve to be quoted, the wrong test report to be requested, or the wrong replacement valve to be installed. The consequences may include seat leakage, insufficient capacity, poor reseating, unstable operation, non-compliant documentation or unsafe pressure protection.<\/p>\n\n\n\n

A common procurement problem occurs when an old drawing says \u201cPRV\u201d but does not include certified capacity or the original relieving case. The replacement valve may match the connection size and set pressure but have a smaller orifice or a different capacity basis. The safer approach is to rebuild the datasheet from process conditions, not copy the abbreviation.<\/p>\n\n\n\n

\n\n\n\n

What Is a PRV?<\/h2>\n\n\n\n

In pressure protection discussions, PRV<\/strong> usually means pressure relief valve<\/strong>. It is a broad term for a device designed to relieve excess pressure from protected equipment or piping when pressure exceeds a specified value.<\/p>\n\n\n\n

PRV as Pressure Relief Valve<\/h3>\n\n\n\n

As a pressure relief valve, PRV may refer to spring-loaded valves, pilot-operated valves, thermal relief valves, safety relief valves or other pressure relief devices depending on project terminology. This broad meaning is useful in general discussion but too vague for final procurement.<\/p>\n\n\n\n

When PRV means pressure relief valve, the RFQ should still confirm set pressure, required relieving capacity, certified capacity, fluid state, back pressure, valve construction, material and certificate requirements. A PRV used for liquid thermal expansion is not reviewed in the same way as a PRV used for high-capacity gas relief to a flare header.<\/p>\n\n\n\n

Important Warning: PRV May Also Mean Pressure Reducing Valve<\/h3>\n\n\n\n

In some engineering, HVAC, water, utility and instrumentation contexts, PRV can also mean pressure reducing valve<\/strong>. A pressure reducing valve is a control or regulating valve used to reduce downstream pressure during normal operation. It is not the same function as a pressure relief valve used for overpressure protection.<\/p>\n\n\n\n

Critical terminology warning:<\/strong> PRV may mean pressure relief valve or pressure reducing valve. These are different devices with different functions. A pressure reducing valve controls downstream pressure; a pressure relief valve protects equipment from overpressure. Confusing them in an RFQ, P&ID, spare parts list or maintenance order can lead to a serious selection error.<\/p>\n\n\n\n

In one replacement review, the spare parts list used \u201cPRV\u201d without a description. The purchasing team treated it as a pressure reducing valve because the line was a utility line. The site engineer later confirmed that the original tag was a pressure relief valve protecting a small pressure vessel. The correction was to revise the tag description, add set pressure and capacity data, and separate pressure reducing valve tags from pressure relief valve tags in the equipment list. The prevention was simple: never use PRV alone without the full valve function.<\/p>\n\n\n\n

Broad Use in Industrial Pressure Protection<\/h3>\n\n\n\n

When PRV is used as pressure relief valve, it is often a generic category rather than a precise valve type. A PRV may be suitable for gas, steam, liquid or thermal expansion service, but the actual design must match the application.<\/p>\n\n\n\n

When PRV Is Too Generic for Engineering Selection<\/h3>\n\n\n\n

PRV is too generic when the project requires certified capacity, code compliance, specific seat tightness, sour service material, sanitary design, pilot-operated construction, balanced bellows construction or defined discharge back pressure. In these cases, the RFQ should specify the actual service and required documentation.<\/p>\n\n\n\n

For a basic explanation of pressure relief valves, read our What Is a Pressure Relief Valve?<\/a>.<\/p>\n\n\n\n

\n\n\n\n

What Is a PSV?<\/h2>\n\n\n\n

PSV<\/strong> usually means pressure safety valve<\/strong>. The term is common in oil and gas, refinery, petrochemical, chemical and process plant documents. In many plants, PSV is used for valves that protect pressure equipment from overpressure and discharge to atmosphere, a closed header, a flare system or another safe location.<\/p>\n\n\n\n

PSV as Pressure Safety Valve<\/h3>\n\n\n\n

A PSV is normally expected to open automatically at the set pressure and relieve a defined flow rate during an overpressure event. It may be spring-loaded, balanced bellows or pilot-operated depending on the service.<\/p>\n\n\n\n

Why PSV Is Common in Oil, Gas and Process Industries<\/h3>\n\n\n\n

PSV is commonly used because process plants often manage pressure relief devices through tagged equipment lists, relief valve schedules, flare studies, inspection plans and management-of-change reviews. The abbreviation is convenient, but it should be supported by a full datasheet and capacity basis.<\/p>\n\n\n\n

PSV Does Not Automatically Define Valve Design or Certification<\/h3>\n\n\n\n

The word PSV does not tell you whether the valve is conventional spring-loaded, balanced bellows or pilot-operated. It also does not confirm certified capacity, orifice designation, back pressure limit, seat leakage requirement or repair documentation.<\/p>\n\n\n\n

A PSV selected for clean gas service may be unsuitable for dirty, wet or fouling gas if the selected design includes a sensitive pilot circuit. A PSV connected to a flare header may also require back pressure review. The abbreviation does not solve these engineering questions.<\/p>\n\n\n\n

\n\n\n\n

What Is a Safety Valve?<\/h2>\n\n\n\n

A safety valve<\/strong> is typically associated with rapid opening behavior, especially in steam, air, gas or other compressible fluid service. In many contexts, it opens quickly when inlet pressure reaches the set pressure and provides overpressure protection for boilers, pressure vessels and pressurized systems.<\/p>\n\n\n\n

Typical Use in Steam, Gas and Compressible Service<\/h3>\n\n\n\n

Safety valves are commonly used where rapid pressure rise must be controlled. Steam systems, compressed air receivers and gas systems often use safety valve terminology. For boiler service, the applicable boiler code and local jurisdiction must be checked.<\/p>\n\n\n\n

Pop Action and Rapid Opening Behavior<\/h3>\n\n\n\n

Many safety valves are designed to open rapidly once the set pressure is reached. This helps the valve achieve lift and relieve flow quickly. However, stable performance still depends on correct sizing, installation, discharge piping and back pressure conditions.<\/p>\n\n\n\n

Safety Valve Does Not Mean Capacity Is Already Verified<\/h3>\n\n\n\n

Calling a device a safety valve does not prove it has enough capacity for the protected equipment. Set pressure, required relieving capacity, certified capacity and relieving pressure must be checked together.<\/p>\n\n\n\n

For pressure terms, read our Safety Valve Set Pressure, Overpressure and Blowdown Explained<\/a>.<\/p>\n\n\n\n

\n\n\n\n

What Is a Relief Valve?<\/h2>\n\n\n\n

A relief valve<\/strong> is often associated with liquid service or thermal expansion protection. It may open more gradually or modulate compared with a pop-action safety valve, depending on design and service.<\/p>\n\n\n\n

Typical Use in Liquid or Thermal Expansion Service<\/h3>\n\n\n\n

Relief valves are commonly used for liquid systems, hydraulic circuits, pump discharge protection, thermal expansion of trapped liquid and some process liquid applications. Liquid relief service must consider viscosity, density, flashing risk, pressure drop, reaction force and discharge destination.<\/p>\n\n\n\n

Modulating or Proportional Opening Behavior<\/h3>\n\n\n\n

Some relief valves open in proportion to pressure increase rather than popping fully open. This behavior may be suitable for liquid pressure control or thermal expansion, but it should not be assumed suitable for high-capacity gas or steam relief without engineering review.<\/p>\n\n\n\n

Why Liquid Relief Service Needs Different Review<\/h3>\n\n\n\n

Liquid relief can create high reaction forces, hydraulic instability and discharge piping issues. Chatter can occur if the valve is oversized, the inlet pressure loss is excessive, or the discharge path is poorly arranged.<\/p>\n\n\n\n

One field case involved a relief valve installed for liquid thermal expansion. The replacement valve matched the thread size and set pressure, but the seat material was unsuitable for the fluid temperature and the discharge line had no clear route to a safe location. The corrective action was to review fluid compatibility, thermal expansion scenario, discharge piping and seat material. The prevention was to treat thermal relief valves as engineered safety devices, not simple fittings.<\/p>\n\n\n\n

\n\n\n\n

What Is a Safety Relief Valve?<\/h2>\n\n\n\n

A safety relief valve<\/strong> is often used as a combined term for a valve that may perform safety valve or relief valve functions depending on service and design. It may be used in gas, liquid or mixed service if the design, sizing basis and certification support the application.<\/p>\n\n\n\n

Why Safety Relief Valve Is Often Used as a Combined Term<\/h3>\n\n\n\n

The term safety relief valve can be useful when a valve is designed for broader pressure relief service. However, the name alone still does not define the correct capacity, opening behavior or fluid suitability.<\/p>\n\n\n\n

Gas, Liquid and Two-Phase Service Considerations<\/h3>\n\n\n\n

Two-phase flow is one of the most error-prone areas in pressure relief design. A relief scenario may involve gas with liquid carryover, flashing liquid, foaming, vapor generation or mixed discharge. A valve described as a safety relief valve should not be assumed suitable for two-phase service unless the sizing basis, manufacturer data and project requirements support that condition.<\/p>\n\n\n\n

Two-phase flow warning:<\/strong> Do not treat a two-phase relief case as a simple gas case or a simple liquid case. Fluid state affects required relieving capacity, flow behavior, discharge piping, reaction force and valve stability. When two-phase or flashing service is possible, request engineering review before selecting a valve.<\/p>\n\n\n\n

Why the Datasheet Must Clarify Actual Service<\/h3>\n\n\n\n

The datasheet should state the medium, fluid state, relieving temperature, required relieving capacity, relieving pressure, back pressure, discharge destination and required certificate. Without this information, the term safety relief valve remains too broad for final procurement.<\/p>\n\n\n\n

\n\n\n\n

Spring-Loaded vs Pilot-Operated Designs Are Not the Same as PRV or PSV Terminology<\/h2>\n\n\n\n

PRV, PSV, safety valve and relief valve are terminology categories. Spring-loaded<\/strong>, balanced bellows<\/strong> and pilot-operated<\/strong> describe valve design. These are different layers of selection.<\/p>\n\n\n\n

Design Type<\/th>How It Works<\/th>Where It May Fit<\/th>Important Risk<\/th><\/tr><\/thead>
Spring-loaded<\/td>Uses spring force to hold the disc closed until inlet pressure overcomes spring force<\/td>General steam, air, gas, liquid and many pressure vessel services<\/td>Can be affected by back pressure, inlet pressure loss, seat condition and operating margin<\/td><\/tr>
Balanced bellows<\/td>Uses a bellows arrangement to reduce the effect of back pressure on force balance<\/td>Services with variable or significant back pressure where compatible<\/td>Bellows fatigue, corrosion and blocked bonnet vent can defeat the intended function<\/td><\/tr>
Pilot-operated<\/td>Uses a pilot valve and dome pressure to control the main valve<\/td>Clean gas service, high pressure service or applications needing tight shutoff, depending on design<\/td>Dirty, wet, sticky or particle-containing service may affect pilot stability<\/td><\/tr><\/tbody><\/table><\/figure>\n\n\n\n

A project may call a device a PSV and still require spring-loaded, balanced bellows or pilot-operated construction. The RFQ should therefore state both the terminology and the actual valve design requirement.<\/p>\n\n\n\n

For a full design comparison, read our Spring-Loaded Safety Valve vs Pilot-Operated Safety Valve<\/a>.<\/p>\n\n\n\n

\n\n\n\n

PRV vs PSV vs Safety Valve vs Relief Valve Comparison Table<\/h2>\n\n\n\n
Term<\/th>Common Meaning<\/th>Typical Service Fluid<\/th>Opening Characteristic<\/th>Typical Industries<\/th>Common Use<\/th>Standards Direction to Verify<\/th>Procurement Warning<\/th><\/tr><\/thead>
PRV<\/td>Pressure relief valve, but may also mean pressure reducing valve in some contexts<\/td>Gas, steam, liquid or thermal expansion, depending on design<\/td>Depends on actual valve type<\/td>General industrial, utility, process, mechanical systems<\/td>Broad pressure relief category or regulating valve abbreviation<\/td>API, ASME, ISO or project specification depending on service<\/td>Always clarify whether PRV means pressure relief valve or pressure reducing valve<\/td><\/tr>
PSV<\/td>Pressure safety valve<\/td>Commonly gas, steam or process relief service, but depends on design<\/td>Often rapid opening or safety relief behavior<\/td>Oil, gas, refinery, petrochemical, chemical plants<\/td>Tagged pressure safety device for process equipment protection<\/td>API 520 \/ API 521 \/ ASME or project specification depending on system<\/td>PSV does not automatically confirm valve design, capacity or certificate<\/td><\/tr>
Safety Valve<\/td>Valve designed to protect against overpressure, often rapid opening<\/td>Typically steam, air, gas or compressible fluids<\/td>Rapid opening \/ pop action in many designs<\/td>Boilers, pressure vessels, air receivers, steam systems<\/td>Overpressure protection where rapid relief is required<\/td>ASME BPVC, ISO 4126-1, local boiler or pressure vessel code<\/td>Set pressure alone does not prove relieving capacity<\/td><\/tr>
Relief Valve<\/td>Valve that relieves pressure, often associated with liquid service<\/td>Typically liquid or thermal expansion service, but terminology varies<\/td>Often proportional or modulating depending on design<\/td>Hydraulic systems, pumps, liquid lines, thermal expansion systems<\/td>Liquid pressure relief, thermal expansion protection, pump protection<\/td>Project specification, API \/ ASME direction depending on equipment<\/td>Do not use liquid relief assumptions for steam or gas service<\/td><\/tr>
Safety Relief Valve<\/td>Combined term for broader pressure relief service<\/td>Gas, liquid or mixed service if design supports it<\/td>Depends on design and service<\/td>Process industry, pressure vessels, chemical systems<\/td>General pressure relief where service may not fit simple terminology<\/td>API 520, ASME, ISO and manufacturer data as applicable<\/td>Clarify fluid state, capacity basis and certification before purchase<\/td><\/tr><\/tbody><\/table><\/figure>\n\n\n\n
\n\n\n\n

How to Choose the Correct Term for Your Project<\/h2>\n\n\n\n

The best method is to start from the protected system, not the abbreviation. The correct term should follow the service, required function and project standard.<\/p>\n\n\n\n

\"Pressure
Start with service conditions, not the abbreviation.<\/figcaption><\/figure>\n\n\n\n

Start with the Protected Equipment<\/h3>\n\n\n\n

Identify whether the device protects a pressure vessel, boiler, compressor, storage tank, pipeline, pump discharge, heat exchanger, reactor or skid system. Equipment type affects applicable code, documentation and inspection requirements.<\/p>\n\n\n\n

Confirm Medium and Fluid State<\/h3>\n\n\n\n

Confirm whether the medium is steam, gas, air, liquid, two-phase, flashing, corrosive, dirty, sticky or hazardous. The fluid state affects valve type, sizing method, material, seat tightness and discharge arrangement.<\/p>\n\n\n\n

Confirm Set Pressure and Required Relieving Capacity<\/h3>\n\n\n\n

Set pressure tells you when the valve starts to open. Required relieving capacity tells you how much flow must be relieved during the governing overpressure scenario. Both are needed. One cannot replace the other.<\/p>\n\n\n\n

Confirm Valve Type and Opening Behavior<\/h3>\n\n\n\n

Specify whether the valve should be conventional spring-loaded, balanced bellows, pilot-operated, thermal relief or another design. Also confirm whether rapid opening, modulating behavior or tight shutoff is important.<\/p>\n\n\n\n

Confirm Back Pressure and Discharge System<\/h3>\n\n\n\n

A valve discharging to atmosphere behaves differently from a valve connected to a long outlet pipe, silencer, common header or flare system. Back pressure can affect opening behavior, lift, capacity and reseating.<\/p>\n\n\n\n

For deeper review, read our How Back Pressure Affects Safety Valve Performance<\/a>.<\/p>\n\n\n\n

Confirm Required Standards and Certificates<\/h3>\n\n\n\n

Confirm whether the project requires ASME, API, ISO, National Board, local pressure equipment regulation, material certificate, seat tightness test, set pressure test, capacity certificate or repair documentation.<\/p>\n\n\n\n

For complete selection logic, read our Safety Valve Selection Guide<\/a>.<\/p>\n\n\n\n

\n\n\n\n

Common Engineering and Procurement Mistakes<\/h2>\n\n\n\n

Terminology errors often become procurement errors. The most common mistakes happen when a buyer copies an old tag description without checking the original engineering basis.<\/p>\n\n\n\n

\"Same
A replacement valve may fit the pipe but fail the required capacity.<\/figcaption><\/figure>\n\n\n\n
Mistake<\/th>What Problem Occurs<\/th>Why It Happens<\/th>Corrective Action<\/th>Prevention<\/th><\/tr><\/thead>
Buying by abbreviation only<\/td>Wrong valve type or function is quoted<\/td>PRV \/ PSV wording is not enough<\/td>Clarify full valve function and service<\/td>Require datasheet and RFQ data<\/td><\/tr>
Replacing by connection size only<\/td>Valve fits pipe but capacity is insufficient<\/td>Orifice area and certified capacity were ignored<\/td>Check capacity certificate and relieving case<\/td>Use capacity-based replacement review<\/td><\/tr>
Using relief valve wording for steam safety service<\/td>Incorrect valve behavior or code basis may be assumed<\/td>Steam service was not clearly stated<\/td>Confirm boiler or steam system requirement<\/td>State medium, code and set pressure clearly<\/td><\/tr>
Calling everything a PSV<\/td>Valve design, back pressure and seat tightness may be missed<\/td>PSV tag was treated as complete specification<\/td>Review valve construction and certified data<\/td>Separate tag name from engineering data<\/td><\/tr>
Ignoring back pressure<\/td>Chatter, reduced lift or poor reseating<\/td>Outlet system was assumed atmospheric<\/td>Review discharge piping and header pressure<\/td>Include back pressure in RFQ<\/td><\/tr><\/tbody><\/table><\/figure>\n\n\n\n

In one replacement review, a valve matched the old inlet and outlet connection sizes, but the protected vessel still exceeded the expected pressure during a relief review. The buyer had ordered by tag name and connection size, not by certified relieving capacity. The real system cause was that the new valve had a smaller internal orifice and different capacity basis than the original valve. The corrective action was to recheck the governing relief scenario, required capacity, valve orifice and capacity certificate. The prevention was to approve replacement valves by set pressure, required capacity, certified capacity, material, back pressure and certificate data, not pipe size alone.<\/p>\n\n\n\n

For capacity review, read our Safety Valve Sizing and Certified Relieving Capacity Guide<\/a>.<\/p>\n\n\n\n

\n\n\n\n

Standards and Technical References to Verify<\/h2>\n\n\n\n

Standards help define design, sizing, selection, installation, testing and inspection expectations. They should be used carefully. A standard name does not replace the actual valve datasheet, capacity certificate or project specification.<\/p>\n\n\n\n

Standards note to verify before publishing:<\/strong>API 520 Part I<\/a> is relevant for sizing and selection direction for pressure-relieving devices. API 520 Part II<\/a> is relevant for installation review. ASME BPVC Section VIII Division 1<\/a> is relevant for pressure vessel code context. ISO 4126-1<\/a> specifies general requirements for safety valves. API 527<\/a> is relevant for seat tightness of pressure relief valves. NBIC Part 4<\/a> provides guidance for pressure relief device installation, inspection, repair and documentation. Confirm latest editions, project specifications and local jurisdiction before publishing or quoting.<\/p>\n\n\n\n

Standard \/ Source<\/th>Where It Helps<\/th>Important Boundary<\/th><\/tr><\/thead>
ASME BPVC Section VIII Division 1<\/td>Pressure vessel design and pressure boundary context<\/td>Does not replace valve manufacturer capacity data<\/td><\/tr>
ASME BPVC Section I<\/td>Boiler and steam boiler applications where applicable<\/td>Use only when boiler service is involved<\/td><\/tr>
API 520 Part I<\/td>Sizing and selection of pressure-relieving devices<\/td>Selection still requires project data and certified capacity<\/td><\/tr>
API 520 Part II<\/td>Installation, inlet and outlet arrangement review<\/td>Does not remove the need for site-specific piping review<\/td><\/tr>
API 521<\/td>Pressure-relieving and depressuring systems, flare\/header context<\/td>Most relevant when discharge systems or plant relief networks are involved<\/td><\/tr>
ISO 4126-1<\/td>Safety valve product requirements<\/td>Should not be treated as a complete application guide<\/td><\/tr>
API 527<\/td>Seat tightness testing direction<\/td>Leakage requirements should be specified in purchase documents<\/td><\/tr>
NBIC \/ National Board<\/td>Inspection, repair, recertification and documentation route<\/td>Jurisdiction and repair authorization requirements must be checked<\/td><\/tr><\/tbody><\/table><\/figure>\n\n\n\n

For a full standards map, read our Safety Valve Standards Guide<\/a>.<\/p>\n\n\n\n

\n\n\n\n

RFQ Checklist When You Are Not Sure Which Term to Use<\/h2>\n\n\n\n

If you are unsure whether to request a PRV, PSV, safety valve, relief valve or safety relief valve, send engineering data instead of guessing the term. A competent supplier can review the data and confirm the suitable terminology and valve type.<\/p>\n\n\n\n

\"RFQ
Complete process data prevents terminology and procurement mistakes.<\/figcaption><\/figure>\n\n\n\n
RFQ Data<\/th>Why It Matters<\/th>Provided<\/th><\/tr><\/thead>
Protected equipment<\/td>Defines code context and protected pressure boundary<\/td>\u2610<\/td><\/tr>
MAWP \/ design pressure<\/td>Used to verify pressure protection basis<\/td>\u2610<\/td><\/tr>
Operating pressure<\/td>Helps check margin below set pressure<\/td>\u2610<\/td><\/tr>
Set pressure<\/td>Defines opening point<\/td>\u2610<\/td><\/tr>
Medium and fluid state<\/td>Gas, steam, liquid, two-phase or flashing service affects selection<\/td>\u2610<\/td><\/tr>
Required relieving capacity<\/td>Confirms whether the valve can protect the equipment<\/td>\u2610<\/td><\/tr>
Relieving temperature<\/td>Affects material, seat and capacity basis<\/td>\u2610<\/td><\/tr>
Back pressure<\/td>Affects opening behavior, lift, capacity and reseating<\/td>\u2610<\/td><\/tr>
Discharge destination<\/td>Atmosphere, header, flare, tank or safe drain behave differently<\/td>\u2610<\/td><\/tr>
Connection and rating<\/td>Defines mechanical interface, not capacity by itself<\/td>\u2610<\/td><\/tr>
Material requirement<\/td>Prevents corrosion, leakage and service failure<\/td>\u2610<\/td><\/tr>
Required certificate<\/td>Supports compliance, inspection and project approval<\/td>\u2610<\/td><\/tr><\/tbody><\/table><\/figure>\n\n\n\n

Minimum Process Data to Provide<\/h3>\n\n\n\n

Provide protected equipment, MAWP, operating pressure, set pressure, medium, fluid state, required relieving capacity and relieving temperature. These data points matter more than the abbreviation.<\/p>\n\n\n\n

Valve Data to Confirm<\/h3>\n\n\n\n

Confirm valve type, design, inlet size, outlet size, orifice area, pressure rating, material, seat type, spring range, back pressure limit and certified capacity.<\/p>\n\n\n\n

Documents and Certificates to Request<\/h3>\n\n\n\n

Request datasheet, nameplate information, set pressure test report, capacity data, material certificate, seat tightness report if required and installation instruction.<\/p>\n\n\n\n

Questions to Ask the Supplier<\/h3>\n\n\n\n